cam question

Discussion in 'Manton Push Rods Top Alcohol Tech Questions' started by bobt, May 11, 2018.

  1. bobt

    bobt Member

    Joined:
    May 30, 2017
    Messages:
    33
    Likes Received:
    0
    putting together a bae hemi. looking for cam info target hp is 1300 to 1500 hp, will be procharger at low boost. my question is. do you have any recommendations on a cam that you have run that was easier on the valve train. the cam is a 54mm heads are 8x and the ci will be 470. if you have any thoughts or have a cam that can be reground to a more conservative profile please let me know. thanks bob.
     
    #1
  2. andreacchiv

    andreacchiv New Member

    Joined:
    Jun 11, 2012
    Messages:
    29
    Likes Received:
    0
    I have a 54mm bullet cam that I bought a few years back and only has 2 dyno pulls on it. It was really light on horsepower and torque when we were on the dyno but it might fit your application well. Will let it go for a good deal.

    I can give you the cam specs if you want to text me.
    416 573 9265
    Vince
     
    #2

Share This Page