Big Chief mag blower manifold, chutes, heads, fuel rails

Discussion in 'Noonan Classifieds' started by dreemchaser, Nov 2, 2015.

  1. dreemchaser

    dreemchaser New Member

    Joined:
    Jan 24, 2015
    Messages:
    4
    Likes Received:
    0
    Mag Big Chief blower manifold, machined for burst panel, welded on inside and bottom of plenum for reinforcement (not repair). Drilled for 1 port nozzle per cylinder. $650

    Used 300 mph chutes (no packs or pilots). Deist 4 line, black with MATCO on canopy; Simpson 8 line, red with CSK (Checker/Shucks/Kragen) on canopy and Simpson 8 line, yellow with Prestone on canopy. $125 each

    426 hemi billet heads (mostly bare). 1 BAE fuel head with intake valves/springs. Needs exhaust seats & valves. Drilled for down nozzles. $400
    2 bare heads, drilled for down nozzles, one head needs to be machined for a valve guide and seat. $600/pair
    1 billet head with valves (no springs/keepers/retainers), drilled for down nozzles. $400
    1 bare billet head drilled for down nozzles. $300
    2 fuel rails with jumper lines. $150

    Prices do not include shipping. kweenofdymonz@gmail.com or (949)212-9534
     
    #1

Share This Page