BAE, MSD, Racepak, Electrimotion, American Racing, Weld, Lamb, GRP

Discussion in 'Noonan Classifieds' started by CopelandRaceCars, Jan 31, 2016.

  1. CopelandRaceCars

    Joined:
    Nov 8, 2015
    Messages:
    45
    Likes Received:
    0
    Used Chrisman 10.5 Complete Rear End with Strange Carbon Brakes 2.91 Gear & Spare 2.91 Gear Checked with No Cracks (Call for Price)

    American Racing "Qualifier" Black Chrome Anglia Mount Dragster Wheels Used $500 for Pair

    Leahy (Electrimotion) New 15v Long Large Battery, Switches, Cables, & Charger $450

    Leahy (Electrimotion) New SB001 Safety Box with Air Solenoids, Receiver, Cables, Switches, & Air Cylinders, & PSI Shutdown Switch $600

    Leahy (Electrimotion) 1 New Red Band Timer Box with Pressure Regulator, Harness, Pressure Transducer, & Pressure Activation Switch $1000

    Leahy (Electrimotion) 2 Used Red Band Timer Boxes with Harnesses Only $325 Each

    New Taylor Valve Cover Restraints $600

    Track-Meter Used Like New $900

    Altronics PerformAire Weather Station Trailer Based with Pager Used $1000

    - BAE Used Blue Stand Rocker Assembly (Race Ready) Call

    - 3 Used Casale & KB Cast Front Covers for BAE, Cam Cover, &a crank trigger wings (call)

    - Racepak transducers used still good condition
    Temp $80
    60 psi $150
    300 psi $150
    (2) 600 psi $150each
    750 psi $150

    - Used Lamb 1602 Calipers with Carbon Pads like new ($1000 for the Set)

    - New Taylor Spark Plug Wire Sets Direct Replacement for MSD Single & Dual Plug (PreCut With Boots & Ends & Can Use Old Plastics) Call

    - New Scratch & Nitro Resistant Top Fuel Style Dragster Windshields 1/8" & 3/16" $595
    - New Scratch & Nitro Resistant Old Style Dragster Windshield 1/8" & 3/16" $275

    - (2) MSD #8158 6 Shooters Good Used $200 Each

    - (2) MSD #8168 Retard Box Good Used $200

    - Innovators West Damper Used Make Offer

    - Hogan Short Deck A/F Manifold $800

    - (2) Dunn Dual Mag Drive Used $500 Each

    - USED BAE Billet Short Deck Block .904 Lifters 54 mm cam 4.310 Sleeves been Windowed & Repaired @ BAE $3000

    -Used BAE billet big bore short deck block 1" lifters 60mm cam no sleeves or studs deck needs to be repaired. Call

    - (15) 7/16” Single Taper 11.920 Long 5/16” Cup Push Rods Used $10 Each

    - (9) 7/16” Single Taper 11.450 Long 5/16” Cup Push Rods Used $10 Each

    - (15) 7/16” Single Taper 11.500 Long 5/16” Cup Push Rods Used $10 Each

    - PAC valve springs #1360 New (45 Total) $550

    - Manley #23677 Retainers New (16 Total) $250

    - Manley #42335 Locators New (16 Total) $50

    - GRP 6.830 A/F Billet Rods (8 new, 6 used) Call

    - GRP 6.850 A/F Billet Rods New (8) Used (8) Call

    - GRP 6.855 A/F Billet Rods New (8) Used (8) Call

    - GRP 6.880 A/F Billet Rods New (8) Used (8) Call

    - JE A/F Pistons 4.375 (1 run 8 Total) $200

    - JE A/F Pistons 4.375 (used 10 total) $200

    - Enderle Pumps (Used)
    80A-1 7.1 Gallon $325
    990 13.4 Gallon $375
    1100 15.7 Gallon $500

    - Settles 43 Gallon Fuel Pump with Inlet Line (make offer)

    - Hadman/Chrisman rear end plates 4" offset $100 Pair
    - Hadman/Chrisman rear end plates 6" offset $100 Pair
    - Hadman/Chrisman rear end plates 6.5" offset $100 Pair

    - Automan Clutch Cannon (Used) $1000

    500 C.I.
    JP1 Block
    BAE Early Billet Fuel Heads Fresh (NEW Seats, Titanium Valves, Locks, Retainers, & Manley Springs)
    (New) Black Duchellis Rocker assembly with Fuel Shafts, Stage V Roller Intake & Exhaust, 7/16 Adjusters
    Bryant Crank
    (New) BME Rods & Pistons
    (New) Crane Cam
    Crane Lifters
    Dan Olson Dragster Pan
    Billet Oil Pump
    (New)Magnesium Manifold
    SSI 1471 Hi-Helix Retro C Rotor with Blower Restraint
    Enderle B&U Injector & K Valve
    (New) Areomotive 17 Gallon Fuel Pump
    Casale Front Drive
    Pulleys from 27-45 Tooth 13-9 to 14 MM
    Dunn Mag Drive (Fresh)
    MSD 44 Mag, Points Box, Coil & Plug Wires
    (New) 3 Coated Sets of Headers to go with it Different Sizes
    $23000
    *****(Motor Sold Complete Will Not Part Out)*****

    ****New & Used Chevy Engine Parts****

    -Jomar stud girdles BBC used $200

    -Smith Bros. push rods used $100

    -Crower stainless steel roller rockers used $300

    -1.7 Jesel Rocker Arms for 18 Degree Brodix, $1000




    I have more specs on parts if needed also more parts coming.
    Call or E-mail Chase or Clay
    CopelandRaceCars@aol.com
    940-395-4198 Call or Text
     
    #1
    Last edited: Jul 12, 2017
  2. Donreed

    Donreed Member

    Joined:
    Nov 17, 2015
    Messages:
    106
    Likes Received:
    0
    Do you still have any of the short deck blocks.7654385265
     
    #2
  3. CopelandRaceCars

    Joined:
    Nov 8, 2015
    Messages:
    45
    Likes Received:
    0
    Yes still have them both.
     
    #3
  4. Donreed

    Donreed Member

    Joined:
    Nov 17, 2015
    Messages:
    106
    Likes Received:
    0
    How much for each and do you have studs and what kind of shape are they in
     
    #4
  5. DCobeen

    DCobeen Member

    Joined:
    Sep 17, 2006
    Messages:
    55
    Likes Received:
    0
    BME rods, please send spec's on rods.
    JE A/F 4.375 pistons Spec's also, CH, coated, dome height, pin size, etc. pictures if available.
    Mahalo, DCobeen cobeen@hawaii.rr.com
     
    #5
  6. CopelandRaceCars

    Joined:
    Nov 8, 2015
    Messages:
    45
    Likes Received:
    0
  7. CopelandRaceCars

    Joined:
    Nov 8, 2015
    Messages:
    45
    Likes Received:
    0
  8. CopelandRaceCars

    Joined:
    Nov 8, 2015
    Messages:
    45
    Likes Received:
    0
  9. CopelandRaceCars

    Joined:
    Nov 8, 2015
    Messages:
    45
    Likes Received:
    0
  10. Mike T

    Mike T Member

    Joined:
    Feb 24, 2006
    Messages:
    48
    Likes Received:
    0
    Is the Ti clutch can a standard rear opening? For a candle stick?
     
    #10
  11. CopelandRaceCars

    Joined:
    Nov 8, 2015
    Messages:
    45
    Likes Received:
    0
    Yes
     
    #11
  12. drew556

    drew556 Member

    Joined:
    Jan 21, 2016
    Messages:
    55
    Likes Received:
    0
    Can you send pics of the rcd single mag drive and price to drew_sc5459@hotmail.com or text to 316-708-7166 thanks Andrew
     
    #12
  13. Mike T

    Mike T Member

    Joined:
    Feb 24, 2006
    Messages:
    48
    Likes Received:
    0
    Can you send a pic of the can? How much? mthomp392@yahoo.com
     
    #13
  14. bart morris

    bart morris New Member

    Joined:
    Aug 14, 2016
    Messages:
    18
    Likes Received:
    0
    looking for rocker stands and shafts for aj 2 fuel heads front cover with bearing support TFX block and a intake
     
    #14
  15. CopelandRaceCars

    Joined:
    Nov 8, 2015
    Messages:
    45
    Likes Received:
    0
  16. CopelandRaceCars

    Joined:
    Nov 8, 2015
    Messages:
    45
    Likes Received:
    0
  17. CopelandRaceCars

    Joined:
    Nov 8, 2015
    Messages:
    45
    Likes Received:
    0
  18. Battleborn

    Battleborn Member

    Joined:
    Oct 9, 2016
    Messages:
    53
    Likes Received:
    1
    how much for the 990 pump?
     
    #18
  19. bj nelson

    bj nelson New Member

    Joined:
    Oct 26, 2004
    Messages:
    10
    Likes Received:
    0
    what will the 4.467 sleeves fit?
     
    #19
  20. CopelandRaceCars

    Joined:
    Nov 8, 2015
    Messages:
    45
    Likes Received:
    0
    $375 Plus Shipping
     
    #20

Share This Page