BAE Billet Block, BAE 8 Heads, Intakes, Cams, Lifters & more

Discussion in 'Noonan Classifieds' started by Will Hanna, Jan 10, 2018.

  1. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,309
    Likes Received:
    43
    Parting out BAE 8 471 Long block.

    This motor can be bought intake to pan with rockers and spares for $25,000 obo. Parting it out now so when parts go, they go.

    BAE -.500 short deck billet block. 4.4675 bore, 54 mm raised cam. No windows or saddles. Spare set of head studs included. $4500

    BAE 8 Heads complete less studs. Heads are complete with Victory Valves, Manley springs, retainers and Loc-Cap system.

    One set new 2016, not ran since assembled and checked from BAE - $5000. Less than 20 runs

    One set 3 runs since assembled and checked from BAE - $4000

    BAE Mag intake for -.500 short deck. 2 avail - $1350 ea

    Pushrods for Short Deck BAE -
    Intake - 7/16 Manton, 3/8 ball, 11.325 OAL, 5 new, 15 good used
    Exhaust - 7/16 Manton, 5/16 ball, 11.860 OAL, 12 new, 20 good used
    Selling as a package - $600

    Erson 54 mm camshafts (1 left) 296/.500/116 48 degree. $300 ea
    NEW Erson 54 mm camshaft, same grind as above - $500

    Morel .904 Hemi lifters - used in good condition - $300 set (4 sets avail)

    PSI standard opening bottom restraint plate SOLD

    PSI "Grimes" big screw opening bottom restraint plate $100

    JE/GRP 4.467 piston and rod combo for -.500 short deck, 3.750 stroke. Will make approximately low to high 10's for compression depending on gasket. 12 new 1.094 wrist pins, 10 new pistons, 3 sets of new piston buttons, 2 sets of 10 run or less GRP Rods, 2 complete racks (piston/pin/rod/rings) with less than 10 runs. Package deal $1250 obo

    Pictures available upon request.

    CA$H TALK$. Let's make a deal.

    Will Hanna
    will.hanna@insidetopalcohol.com
    979.415.4959 (please no calls or texts after 9 p.m. CST)
     
    #1
    Last edited: Jan 29, 2018
  2. OwnBlock

    OwnBlock Member

    Joined:
    Jun 12, 2006
    Messages:
    217
    Likes Received:
    2
    Will if the psi plate is for d and not damaged i will take it
     
    #2

Share This Page