BAE Billet Block, BAE 8 Heads, Intakes, BAE Silver Stand Rocker Assembly, Cams, Lifters & more

Discussion in 'Noonan Classifieds' started by Will Hanna, Jan 10, 2018.

  1. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    May 6, 2003
    Likes Received:
    Parting out BAE 8 471 Long block.

    This motor can be bought intake to pan with rockers and spares for $25,000 obo. Parting it out now so when parts go, they go.

    BAE -.500 short deck billet block. 4.4675 bore, 54 mm raised cam. No windows or saddles. Spare set of head studs included. $4500

    BAE 8 Heads complete less studs. Heads are complete with Victory Valves, Manley springs, retainers and Loc-Cap system.

    One set new 2016, not ran since assembled and checked from BAE - $5000. Less than 20 runs

    One set fresh not ran since asssembled and checked from BAE - $4000

    One set 3 runs since assembled and checked from BAE - $4000

    BAE Mag intake for -.500 short deck. 2 avail - $1350 ea

    BAE silver stand Rocker assembly. Intake rockers are 7/16 self oiling adjusters. Comes with 12 new spare intake rockers. SOLD Pushrod combo for .500 short deck available.

    Erson 54 mm camshafts (1 left) 296/.500/116 48 degree. $300 ea
    NEW Erson 54 mm camshaft, same grind as above - $500

    Morel .904 Hemi lifters - used in good condition - $300 set (4 sets avail)

    PSI standard opening bottom restraint plate SOLD

    PSI "Grimes" big screw opening bottom restraint plate $100

    JE/GRP 4.467 piston and rod combo for -.500 short deck, 3.750 stroke. Will make approximately low to high 10's for compression depending on gasket. 12 new 1.094 wrist pins, 10 new pistons, 3 sets of new piston buttons, 2 sets of 10 run or less GRP Rods, 2 complete racks (piston/pin/rod/rings) with less than 10 runs. Package deal $1250 obo

    Pictures available upon request.

    CA$H TALK$. Let's make a deal.

    Will Hanna
    979.415.4959 (please no calls or texts after 9 p.m. CST)
    Last edited: Jan 18, 2018 at 6:01 AM
  2. OwnBlock

    OwnBlock Member

    Jun 12, 2006
    Likes Received:
    Will if the psi plate is for d and not damaged i will take it

Share This Page