6/71, Bird catcher, Fuel Heads, lots of parts

Discussion in 'Old NRE X-1 Heads Free Classifieds' started by darkside, Mar 17, 2014.

  1. darkside

    darkside Member

    Joined:
    Nov 22, 2004
    Messages:
    394
    Likes Received:
    1
    Compleate set of new, 8)pistons, 10)rods, 8)pins and buttons (all New) 4.187 bore 4.5" crank 11.7/1-cr domed alcohol - convert your Top Fuel motor to alcohol

    2) BAE Fuel heads compleate or bare std deck height
    2) JFR Fuel Heads. compleate or bare ( .100" thick)
    1) 6-71 Wright way blower 1-run
    1) Mike Kuhl 14/71 blower
    1) 4" blower snout
    1) 5" blower snout
    1) +.100 AJPE intake (nice)
    1) +.100 KB intake 10 bolt (nice)
    1) Std KB intake 10 bolt (nice)
    1) 12 " Strange with carbon brakes
    picture:
    ftp://ftp.darkside.ca/chassis/strang-12.jpg
    - 2.4" Manley Titanium Intake Valves - BAE-Fathead/ST6 - USED 10 runs, set of 8 (3 sets available)
    - 2.4" Victiry Titanium Intake Valves - BAE-Fathead/ST6 - USED 1 run, set of 8
    - 1.9" Manley Titanium Exaust Valves - BAE-Fathead/ST6/8 - NEW, set of 8
    - 2.425" Manley Titanium Intake Valves - BAE-Fathead/ST5 - 14 USED(like new) and 1 NEW
    1) set fuel rocker arms blue stands compleate ( will separate )
    1) Racepak Pro 1a 8 egt boost flowmeter etc
    1) Lenco 1.75 reverser
    1) TFX-FC-drysump pan (nice)
    8) stage V intake RA
    1) Crane R296/4778 2SR6 - 10X raised -std size (fresh)
    1) Waterman pump extension gear u/d 18%
    1) set new aurora wires (fat head)
    1) set used MSD wires (fat head)
    1) set NEW MSD wires Hemi
    1) BDK valve
    3) fuel pump extensions ( billet/.25 bolts)
    2) 12 stage leanout/enrichments
    several) single stage leanout/enrichments
    2) Centerline spindle mount wheels - old style - FC
    2) cragar 16x16 5 on 5.5, tubes and liners- SFI 15.1
    2) Cragar Wheels 17x2.2 - dragster
    2) 16" Liners
    2) Centerline Convo Pro Wheels 16x16
    Pictures:
    http://parts.darkside.ca/catalog/8
    9) AFT 9/16 titanium stands
    1) Crower 10" pedal clutch without ring gear, titanium, big stand
    1) Crower 10" pedal clutch with ring gear, alum, big stand
    1) Crower 10" flywheel alum, big stand
    1) Crower 10" flywheel alum, small stand
    1) Crower 10" flywheel titanium, big stand
    7) Bonifante 10" clutch floaters New - small stand crower(1/2"bolts)
    1) GORR OVER BOOST SAFETY VALVE
    1) Sitko mag drive lower assembly
    2) 9" moser 31 spline axles, 44-48"
    2) NEW 8.8" moser 31 spline axles, 40-44"
    1) 8.8" cclip kits
    1) 9" mini spool
    2) 8.75 and 9" , 727 yokes and couplers

    1) altered body
    http://www.darkside.ca/media-gallery/detail/162/642

    used SPE floater kit compleate - 5 on 5,5

    ..............call Dave@ 403-547-6691 or david@darkside.ca or PM
     
    #1
    Last edited: Mar 20, 2014
  2. darkside

    darkside Member

    Joined:
    Nov 22, 2004
    Messages:
    394
    Likes Received:
    1
    Updated list ----- thanks.
     
    #2

Share This Page