526 MBR Engines, Parts - Bruno Blower Converters

Discussion in 'Noonan Classifieds' started by DANA WARDELL, Feb 19, 2018.

  1. DANA WARDELL

    DANA WARDELL Member

    Joined:
    Jul 14, 2010
    Messages:
    261
    Likes Received:
    2
    Pair of late design MBR billet cylinder heads with new 2.60 titanium Victory intakes and 1.95 exhaust, new PAC springs, immaculate condition $3,500. Spare identical head fresh $2,000 plus the ride.

    Set of brand new PAC part #1351, valve springs never used for above combination $600plus the ride.

    Pair of late design MBR billet cylinder heads, one design older than the above heads with fresh valve job, fresh PAC valve springs, 2.60 titanium Victory intakes and 1.95 exhaust flow the same $3,000 plus the ride.

    Two sets of MBR billet cylinder heads in excellent condition with 2.40 titanium Victory intakes and 1.95 exhaust, ready to install and run $2,500 each pair plus the ride.

    New style MBR magnesium valve covers, powder coated black, polished aluminum tube retainers "CORVETTE" cnc engraved on covers $800 plus the ride.

    10.2 short deck MBR magnesium intake manifold with additional down nozzels, presently used in screw blower application with screw blower adapter plate, immaculate condition $1,200 with plate or $1,100 without the plate, plus the ride.

    Set of short deck MBR head studs 10 7/8 inches long, 5/8 large diameter $400 plus the ride

    Set of MBR rocker style Manton push rods for above combination $200 plus the ride.

    Pair of Spec-Rite Bruno blower ( non lock up )converters 4500 stall, one 600 rpm loose one 200 rpm tight, One and a quarter inch shafts, 6 bolt flex plate pattern, have been 5.82 in a Bickle 63 Corvette pro mod at 2750 lbs, immaculate condition, just freshened by Spec Rite, all information on these converters available from Spec Rite, changed combinations, $1,500 each, plus the ride.

    Blower snout 6", 12 bolt Kobelco pattern $300. with coupler $425. Aluminum 2" CNC spacer $50 plus the ride.

    BE READY FOR UPCOMING SEASON! Have 2- Fresh 526 cu. Inch, billet MBR 10.7 deck engines, fresh just back from MBR for line bore and machine work, assembled here in our shop, manifold to pan, 4.125 stroke, 4.500 bore, 11.6 to 1 compression, Newton billet block that have been repaired professionaly by MBR, blocks re-cnc'd, billet MBR heads, cast magnesium intake manifolds, GRP rods, Arias pistons, Olson oil pan, cast magnesium front timing covers, full valve train with black powder coated MBR valve covers, Crane cams, Morel 1 inch lifters, 2.600 Victory titanium intake valves, 1.950 Victory stainless exhaust valves, RCD crank hubs with crank trigger degree wheels, cranks have just been magged and polished with .010 under mains and standard rods, no oil pumps or pulleys, both have fresh or new main caps, with fresh line hones, fresh honed with new sleeves, new rings, fresh valve jobs , fresh valve springs, everything between the two are interchangeable and still in great shape. Engines are race ready and should be competitive and have been in the 5.50's in an Alcohol Funny Car with a best of 5.52 259. One comes with new roller style MBR rocker assembly $22,000, the other has the black steel conventional rockers $20,000, Front RCD crank supports available additional cost, spare parts available. plus the ride. Compare to new one from MBR around $52k plus. Purchase both engines, with spares for $40,000 plus the ride

    8.3 Ltr Arias cast block,10.2 deck height, 4.50 bore engine in very nice shape, never windowed. comes with low run Arias pistons and GRP rods, 5/8 inch head studs. Dan Olson 12 quart wet sump pan. Like new-fresh late model billet cylinder heads with NEW Victory 2.40 titanium intakes and Victory stainless exhaust valves, springs and new retainers. Crane lifters, Manton push rods. Complete rocker assembly, shafts, stands and rockers, magnesium MBR blower intake manifold with burst panel, aluminum front fuel pump extension, RCD front degree wheel, this engine needs only a crank, cam and front gears to complete $15,000 or I will complete and,assemble with cam, crank and gears and gaskets, $18,000 long block manifold to pan, Billet magnesium MBR late model single plug valve covers, powder coated black $800 extra.

    572 (2) 8.3 ltr. 10.7 deck, Arias blown alcohol engines. complete ready to run, solid cast aluminum blocks and water cylinder head engines. Complete from injectors to pans. Enderle upright barn door injectors, recently freshened Littlefield 14-71 superchargers with belts and pulleys, idler pulley and idler plate, Arias 4.50 pistons, New GRP rods, billet 4.50 crankshaft, Crane roller cams and lifters, Manton push rods. Magnesium valve covers with burn down breathers. Enderle 1200 fuel pumps, Waterman shut off, all new distribution and port hoses, aluminum front fuel pump extension, external Peterson oil pumps, Dan Olson 12 quart wet sump aluminum pans, magnesium front cover mag and oil pump drives, Mallory Super Mag 3, 3.5 volt mags, coils and Hemi wires. $18,000 each. Will separate injectors, blowers, fuel system, oil pumps and sell as long blocks, manifold to pan $15,000 each, plus the ride.

    contact phoenixmtrspts@gmail.com, pictures available .
     
    #1
    Last edited: Aug 10, 2018
  2. KDavidson

    KDavidson Member

    Joined:
    Dec 7, 2005
    Messages:
    287
    Likes Received:
    0
    Dana,
    Please check your email.

    Keith
     
    #2
  3. DANA WARDELL

    DANA WARDELL Member

    Joined:
    Jul 14, 2010
    Messages:
    261
    Likes Received:
    2
    #3
  4. DANA WARDELL

    DANA WARDELL Member

    Joined:
    Jul 14, 2010
    Messages:
    261
    Likes Received:
    2

Share This Page