Pair of late design MBR billet cylinder heads with new 2.60 titanium Victory intakes and 1.95 exhaust, new PAC springs, immaculate condition $3,500. Spare identical head fresh $2,000 plus the ride. Set of brand new PAC part #1351, valve springs never used for above combination $600plus the ride. Pair of late design MBR billet cylinder heads, one design older than the above heads with fresh valve job, fresh PAC valve springs, 2.60 titanium Victory intakes and 1.95 exhaust flow the same $3,000 plus the ride. Two sets of MBR billet cylinder heads in excellent condition with 2.40 titanium Victory intakes and 1.95 exhaust, ready to install and run $2,500 each pair plus the ride. New style MBR magnesium valve covers, powder coated black, polished aluminum tube retainers "CORVETTE" cnc engraved on covers $800 plus the ride. 10.2 short deck MBR magnesium intake manifold with additional down nozzels, presently used in screw blower application with screw blower adapter plate, immaculate condition $1,200 with plate or $1,100 without the plate, plus the ride. Set of short deck MBR head studs 10 7/8 inches long, 5/8 large diameter $400 plus the ride Set of MBR rocker style Manton push rods for above combination $200 plus the ride. Blower snout 6", 12 bolt Kobelco pattern $300. with coupler $425. Aluminum 2" CNC spacer $50 plus the ride. BE READY FOR UPCOMING SEASON! Fresh 526 cu. Inch, billet MBR 10.7 deck engine, fresh just back from MBR for line bore and machine work, assembled here in our shop, manifold to pan, 4.125 stroke, 4.500 bore, 11.6 to 1 compression, Newton billet block that have been repaired professionaly by MBR, block re-cnc'd, billet MBR heads, cast magnesium intake manifold, GRP rods, Arias pistons, Olson oil pan, cast magnesium front timing cover, full valve train with black powder coated MBR valve covers, Crane cams Morel 1 inch lifters, 2.600 Victory titanium intake valves, 1.950 Victory stainless exhaust valves, RCD crank hubs with crank trigger degree wheels, cranks have just been magged and polished with .010 under mains and standard rods, no oil pump or pulleys, has fresh or new main caps, with fresh line hone, fresh honed with new sleeves, new rings, fresh valve job , fresh valve springs, in great shape. Engine is race ready and should be competitive and has been in the 5.50's in an Alcohol Funny Car with a best of 5.52 259. has black steel conventional rockers $20,000 plus the ride. Front RCD crank support available at additional cost, spare parts available. Compare to new one from MBR around $52k plus. 572 (2) 8.3 ltr. 10.7 deck, Arias blown alcohol engines. complete ready to run, solid cast aluminum blocks and water cylinder head engines. Complete from injectors to pans. Enderle upright barn door injectors, recently freshened Littlefield 14-71 superchargers with belts and pulleys, idler pulley and idler plate, Arias 4.50 pistons, New GRP rods, billet 4.50 crankshaft, Crane roller cams and lifters, Manton push rods. Magnesium valve covers with burn down breathers. Enderle 1200 fuel pumps, Waterman shut off, all new distribution and port hoses, aluminum front fuel pump extension, external Peterson oil pumps, Dan Olson 12 quart wet sump aluminum pans, magnesium front cover mag and oil pump drives, Mallory Super Mag 3, 3.5 volt mags, coils and Hemi wires. $18,000 each. Will separate injectors, blowers, fuel system, oil pumps and sell as long blocks, manifold to pan $15,000 each, plus the ride. contact email@example.com, pictures available .