526 MBR Engines (2) - 8.3 Ltr. Parts

Discussion in 'Noonan Classifieds' started by DANA WARDELL, Jun 20, 2015.

  1. DANA WARDELL

    DANA WARDELL Member

    Joined:
    Jul 14, 2010
    Messages:
    232
    Likes Received:
    0
    BE READY FOR UPCOMING SEASON! Have 2- Fresh 526 cu. Inch, billet MBR engine, fresh just back for MBR for line bore and machine work, assembled here in our shop, manifold to pan, 4.125 stroke, 4.500 bore, 11.6 to 1 compression, Newton billet block that have been repaired professionaly by MBR, blocks re-cnc'd, billet MBR heads, cast magnesium intake manifolds, GRP rods, Arias pistons, Olson oil pan, cast magnesium front timing covers, full valve train with black powder coated MBR valve covers, Crane cams, Morel 1 inch lifters, 2.600 Victory titanium intake valves, 1.950 Victory stainless exhaust valves, RCD crank hubs with crank trigger degree wheels, cranks have just been magged and polished with .010 under mains and standard rods, no oil pumps or pulleys, both have fresh or new main caps, with fresh line hones, fresh honed with new sleeves, new rings, fresh valve jobs , fresh valve springs, everything between the two are interchangeable and still in great shape. Engines are race ready and should be competitive and have been in the 5.50's in an Alcohol Funny Car with a best of 5.52 259. One comes with new roller style MBR rocker assembly $22,000, the other has the black steel conventional rockers $20,000, Front RCD crank supports available additional cost, spare parts available. plus the ride. Compare to new one from MBR around $52k plus.

    8.3 Ltr Arias cast block,11.2 deck height, 4.50 bore engine in very nice shape, never windowed. comes with low run pistons and rods, head studs. Dan Olson 12 quart wet sump pan. Like new-fresh late model billet cylinder heads with NEW Victory 2.40 titanium intakes and Victory stainless exhaust valves, springs and new retainers. Roller cam and lifters, Manton push rods. Complete rocker assembly, shafts, stands and rockers, magnesium MBR blower intake manifold with burst panel, aluminum front fuel pump extension, RCD front degree wheel, black powder coated valve covers, this engine needs only crank, cam and front gears to complete $15,000 or I will complete and,assemble with new rings, bearings and gaskets, $18,000 plus the ride

    572 (2) 8.3 ltr. Arias blown alcohol. complete ready to run, solid cast aluminum blocks and water cylinder head engines. Complete from injectors to pans. Enderle upright barn door injectors, recently freshened Littlefield 14-71 superchargers with belts and pulleys, idler pulley and idler plate, Arias 4.50 pistons, New GRP rods, billet 4.50 crankshaft, Crane roller cams and lifters, Manton push rods. Magnesium valve covers with burn down breathers. Enderle 1200 fuel pumps, Enderle alcohol K-Valves, Waterman shut off, all new distribution and port hoses, aluminum front fuel pump extension, external oil pumps, Dan Olson 12 quart wet sump aluminum pans, magnesium front cover mag and oil pump drives, Mallory Super Mag 3 4.5 volt mags, coils and wires. $20.000 each, freshened up for $19,000 each unfreshened, Will separate injectors, blowers, fuel system, oil pumps and sell as long blocks, manifold to pan $15,000 each, plus the ride.

    2 sets of black rocker assemblies, non roller, complete in immaculate condition. $1400.00 set, OBO plus the ride.

    Gold, later style rocker stands, no shafts or rockers, just the stands, complete set of ten to accmodate one pair of heads or use as spares, $800.00 plus the ride.

    Stack of misc thickness copper head gaskets, 4:375 and 4:50, $50.00 per pair OBO, plus the ride

    Billet MBR pair of single plug heads, assembled with 2.40 Victory titanium intake valves, 1.95 Victory exhaust valves, springs and retainers, updated mods by MBR, nice condition $2500.00 plus the ride. Pictures available.

    Front dual mag v-drives (2) with front fuel pump mount. $500.00 ea. plus the ride.

    Magnesium dual plug Fontana black powder coated valve covers $300.00 plus the ride.

    Dan Olson steel 8.3 ltr, 10 quart 8.3 ltr. dragster-funny car pan, good condition, $200.00

    Aluminum 8.3 ltr. square 12 quart funny car-dragster wet sump pan with windage tray and in- pan oil heater, had repair patch welded to bottom of pan, nice condition $200.00 plus the ride

    Dan Olson 8.3 ltr. square 12 quart funny car-dragster wet sump pans (3) with windage trays, two have had slight repair done but in very nice condition $300.00 each, other is in like new immaculate condition $400.00, compare new price form Olson $800.00, plus the ride

    Call me with what you might need and see if I can be of any assistance.

    Call Dana Wardell (916) 849-3551 or e-mail phoenixmtrspts@gmail.com for pictures and package pricing,
     
    #1
    Last edited: Dec 28, 2017
  2. Nancy Matter

    Nancy Matter Member

    Joined:
    Aug 17, 2010
    Messages:
    153
    Likes Received:
    3
    did you receive my messge Dana?
     
    #2
  3. KYTHUNDER572

    KYTHUNDER572 New Member

    Joined:
    Jan 16, 2012
    Messages:
    9
    Likes Received:
    0
    Can you email me a couple pictures of the MBR heads and Fontana valve covers thanks
     
    #3
  4. DANA WARDELL

    DANA WARDELL Member

    Joined:
    Jul 14, 2010
    Messages:
    232
    Likes Received:
    0
    Sent you an e-mail with pictures. Thanks Dana
     
    #4
  5. DANA WARDELL

    DANA WARDELL Member

    Joined:
    Jul 14, 2010
    Messages:
    232
    Likes Received:
    0

Share This Page