526 MBR Engine - 8.3 Ltr. Parts

Discussion in 'Noonan Classifieds' started by DANA WARDELL, Jun 20, 2015.

  1. DANA WARDELL

    DANA WARDELL Member

    Joined:
    Jul 14, 2010
    Messages:
    281
    Likes Received:
    4
    Have a FRESH -526 cu. Inch, READY TO RUN, billet MBR engine, fresh just back from MBR for line bore and machine work, assembled here in our shop, manifold to pan, 4.125 stroke, 4.500 bore, 11.6 to 1 compression, Newton billet block that have been repaired professionaly by MBR, block re-cnc'd, billet MBR heads, cast magnesium intake manifold, GRP rods, Arias pistons, Olson oil pan, cast magnesium front timing cover, full valve train with black powder coated MBR valve covers, Crane cam, Morel 1 inch lifters, 2.600 Victory titanium intake valves, 1.950 Victory stainless exhaust valves, RCD crank hub with crank trigger degree wheel, crank has just been magged and polished with .010 under mains and standard rods, no oil pump or pulleys, fresh or new main caps, with fresh line hone, fresh honed with new sleeves, new rings, fresh valve job, fresh valve springs. Engine is race ready and should be competitive and has been in the 5.50's in an Alcohol Funny Car with a best of 5.52 259. Has black steel conventional rockers $22,000, Front RCD crank support available additional cost, spare parts available. Compare to new one from MBR around $52k plus. Price $22,000 plus the ride

    572 (2) 8.3 ltr. Arias blown alcohol. complete ready to run, solid cast aluminum blocks and water cylinder head engines. Complete from injectors to pans. Enderle upright barn door injectors, recently freshened Littlefield 14-71 superchargers with belts and pulleys, idler pulley and idler plate, Arias 4.50 pistons, New GRP rods, billet 4.50 crankshaft, Crane roller cams and lifters, Manton push rods. Magnesium valve covers with burn down breathers. Enderle 1200 fuel pumps, Enderle alcohol K-Valves, Waterman shut off, aluminum front fuel pump extension, external oil pumps, Dan Olson 12 quart wet sump oil pans, magnesium front cover mag and oil pump drives, Mallory Super Mag 3 4.5 volt mags, coils and wires. $15,000 unfreshened each, or freshened up for $18,000 each.

    Gold, later style CNC light weight rocker stands, no shafts or rockers, just the stands, complete set of ten to accmodate one pair of heads or use as spares, $500.00 plus the ride.

    Stack of misc thickness copper head gaskets, 4:375 and 4:50, $50.00 per pair OBO, plus the ride

    Billet MBR pair of single plug billet heads, assembled with 2.40 Victory titanium intake valves, 1.95 Victory exhaust valves, springs and retainers, updated mods by MBR, nice condition $2500.00 plus the ride. Pictures available.

    Two sets late model billet MBR cylinder heads with 2.60 titanium Victory intakes, 1.95 Victory exhaust, PAC springs, retainers, first set $4,000, second set, all new, year newer $5,000, pictures avail. One spare head, later model complete MBR cylinder head head $2,500

    Front dual mag drive with front fuel pump mount. $500.00. plus the ride.

    MBR late model single plug Magnesium, black powder coated single plug valve covers $1,000 obo plus the ride

    Dan Olson steel 8.3 ltr, 10 quart 8.3 ltr. dragster-funny car pan, good condition, $200.00

    Dan Olson 8.3 ltr. square 12 quart funny car-dragster wet sump pan with windage tray, has had slight repair done but in very nice condition $300.00. plus the ride

    Call me with what you might need and see if I can be of any assistance.

    Call Dana Wardell (916) 849-3551 or e-mail phoenixmtrspts@gmail.com for pictures and package pricing,
     
    #1
    Last edited: Oct 28, 2018
  2. Nancy Matter

    Nancy Matter Member

    Joined:
    Aug 17, 2010
    Messages:
    168
    Likes Received:
    3
    did you receive my messge Dana?
     
    #2
  3. KYTHUNDER572

    KYTHUNDER572 New Member

    Joined:
    Jan 16, 2012
    Messages:
    10
    Likes Received:
    0
    Can you email me a couple pictures of the MBR heads and Fontana valve covers thanks
     
    #3
  4. DANA WARDELL

    DANA WARDELL Member

    Joined:
    Jul 14, 2010
    Messages:
    281
    Likes Received:
    4
    Sent you an e-mail with pictures. Thanks Dana
     
    #4
  5. Nancy Matter

    Nancy Matter Member

    Joined:
    Aug 17, 2010
    Messages:
    168
    Likes Received:
    3
    Hey Dana, Sorry I haven't gotten back to you yet, Will get that info to you this week. Have to get them down, clean em up and shoot some pics.

    Have a Great Day.....
     
    #5
  6. DANA WARDELL

    DANA WARDELL Member

    Joined:
    Jul 14, 2010
    Messages:
    281
    Likes Received:
    4

Share This Page