3 qt accusump

Discussion in 'PSI Superchargers Tech Questions' started by blown1020, Dec 20, 2006.

  1. blown1020

    blown1020 New Member

    Joined:
    Mar 17, 2006
    Messages:
    61
    Likes Received:
    0
    where would be the best place to tie in on a kb olds oil system,tee off the system 1 oil filter line at block?
     
    #1
  2. teamtukr

    teamtukr New Member

    Joined:
    Dec 24, 2005
    Messages:
    16
    Likes Received:
    0
    acusump

    my system 1 filter adapter had 3rd pipe adapter on top thats where put ours.
    best thing i ever did!!! if not t-ee in line coming out of filter!
     
    #2
  3. blown1020

    blown1020 New Member

    Joined:
    Mar 17, 2006
    Messages:
    61
    Likes Received:
    0
    thanks for your reply!
     
    #3
  4. ITS IN MY BLOOD

    Joined:
    Dec 2, 2004
    Messages:
    1,093
    Likes Received:
    2
    Check with Nathan Sitko they run a accusump and its
    plumbed in to the motor the best way.
     
    #4
  5. funnycarguy 230

    Joined:
    Jul 6, 2004
    Messages:
    388
    Likes Received:
    0
    What about plumbing it in a BBC? I do run a external filter I'm guessing in the return from the filter.
     
    #5
  6. T.A.D. 776

    T.A.D. 776 New Member

    Joined:
    Oct 12, 2004
    Messages:
    217
    Likes Received:
    0
    The pressure line out of the Accusump T's into the outlet side of the oil filter so it is filled with filtered oil. Always use a one way check valve between the the filter and the T so you do not backflush the filter and waste pressure and volume that needs to go to the bearings.
    I am a real believer in the value of the accusump for backup oil pressure and volume. Plus the ability to preoil and pressurize an engine before fireup.
     
    #6
  7. blown1020

    blown1020 New Member

    Joined:
    Mar 17, 2006
    Messages:
    61
    Likes Received:
    0
    where can the check valve be bought at,thanks!
     
    #7
  8. T.A.D. 776

    T.A.D. 776 New Member

    Joined:
    Oct 12, 2004
    Messages:
    217
    Likes Received:
    0
    Full Race Supply has every plumbing part you could need.
    With 25 years in business as a wholesale warehouse distributor of 74 major brands of hard core racing car, truck and boat parts not counting tires, wheels, oils and fuel that Full Race Supply also warehouse distributes.
    Plus Full Race Supply carries 387 product lines of performance and custom accessories for street rods, 4X4 trucks and boats.
    World wide shipping with a direct to racing team sales program.
    Stop paying high prices and searching all over for your parts.
    The owner as a racer and engine builder will know what you need and get you the right part the first time with the information you supply.
    So have your sizes ready and then call.

    1-800-313-7223 toll free. Call between 9:00 am to 5:00 pm pacific std time.
    email dhitt776@yahoo.com

    Visa, MasterCard or paypal accepted.

    OK so it seems like a shamless advertising plug but it's good information.
     
    #8

Share This Page