225 Inch Stirling FE Fuel Car - Nicest on the Planet

Discussion in 'Noonan Classifieds' started by DANA WARDELL, Nov 4, 2017.

  1. DANA WARDELL

    DANA WARDELL Member

    Joined:
    Jul 14, 2010
    Messages:
    269
    Likes Received:
    3
    Winner, Winner Chicken Dinner!

    Have one of the nicest front engine dragsters on the planet. 225 inch Stirling fuel chassis formerly Kenny Youngblood's injected nitro dragster. Only full body chassis Stirling built with inboard steering. Will cert for Top Fuel or A/Fuel, currently running 7.0 Pro. Just featured in the January 2018 issue of Drag Racer Magazine, four pages of coverage, can see additional pictures on our Face Book sports page, Phoenix Motorsports.

    Roller: $28,000 - PENDING SOLD
    Twenty One inch wide shoulder cage and will acommodate a tall driver, 1930 lbs with 10 gallons fuel and 100 lbs front weight box, 225 inch full aluminum body with front custom wing and rear canard wings, stunning $15k mahogony and white paint job, pinstriped and gold leaf.
    Front Weld Alumnastar dragster spindle mount wheels new this past season, front Goodyear tires, chrome front axles.
    Rear Weld Double bead lock wheels Goodyear tires
    Strange modular rear end with carbon fiber brakes, Strange Ultra 9.5 case, new 3:91 strange 40 spline gears and 40 spline thru axle.
    Braced blow back tube and driveshaft cover.
    Two 10Lb DJ Cold Fire bottle system.
    Morosso Accusump with automatic on-off solenoid
    RPM 10 monitor data logger-computer system, egts, oil pan pressure, manifold pressure, fuel, transmission temp, hat pressure, cyl head temp, drive shaft, etc.
    DJ black parachutes and black chute packs new this year.
    ISP side and rear head pads
    Carbon fiber seat with ISP pad
    DJ Seat Belts - Cam Lock just checked and recertified January 2018
    Lower belly pan and aluminum engine diaper-containment pan
    New windshield, all chrome polished bolts, ARP hardware used on everything
    Black powder coated front motor plate and mid mount plate
    Polished air bottle, air shifted power glide shifter, trans brake Pro Werks steering wheel
    Professionally wired.
    Chrome powder coated single wheelie bar
    Everything polished, plated or powder coated

    New Quick Pro Jacks, black matte powder coating with pump and hoses add $2,000 - SOLD

    Engine: $30,000
    COMPLETE ENGINE ! MBR 526 engine ready to install and run, has been 5.52 at 252 mph in a alcohol funny car, 6.83 at 200 mph in 7.0 trim with no tune up.
    526 MBR 10.7 deck Newton billet block,
    MBR billet late design 2:60 titanium valve heads.
    Enderle 3 hole polished up right injector with carbon fiber snorkle
    Black anodized cnc aluminum spacer/riser between the blower and injector
    8.71 Kobelco high helix front discharge supercharger, makes 24 lbs boost at 10% over at 8,000
    DJ restraint plate and new just recertified January 2018, restraints, pins and mounting paddles.
    Late style MBR cross over oiling roller rocker assemblies with Manton push rods.
    Bryant 4.125 billet crank, just checked and polished, Chevrolet mains, Hemi rod journals,
    RCD front degree wheel
    Crane Cam and Morell lifters.
    GRP brand new rods, Arias pistons 4.50 bore 10.8 to 1 compression. New rings
    Magnesium MBR intake manifold,
    Magnesium MBR front cover. RCD front fuel pump extension, front hub and degree wheel
    RCD front crank support.
    MSD pro mag 20 with coil, box and wire set, MSD 2 Step new with chips.
    Enderle three hole stand up polished injectors with black billet riser and carbon fiber stand up hat Enderle fuel pump, 110 12.8 gph
    Enderle k-valve, quik fast adjuster, fuel flow meter, all new black fuel lines with all black fittings. Black powder coated MBR magnesium valve covers with RCD burn down tubes.
    System 1 in line oil filter and lines, Dan Olson 10 quart aluminum oil pan,
    Barnes single stage oil pump and lines 120 oil pressure at idle 110 in the lights.
    RCD belt guard and starter cage polished,
    8mm 1600 belts and 8 mm GT pulleys. RCD idler bracket, polished ider and RCD idler brace Chrome zoomie headers, copper gaskets with header covers, with egt bungs.
    Spare rods, pistons, titanium valves, push rods and rockers, being freshend now with new cam bearings, bearings and rings, fresh line bore, crank just magged and polished, fresh valve job and springs.

    Transmission: $5,000 OBO
    ATI monster shorty power glide for blown alcohol application 3,000 hp. plus application. Large ringless shaft, pro mod pump, drum and clutches. 1:80 low gear, deep aluminum pan with tempreature and pressure sensors
    Spec Rite 3800 stall, blown application converter
    Meziere Flex Plate
    Puke Tank - ATI

    32 Foot Race Coach Three Axle Trailer: $20,000
    Beautiful white tag trailer with load level torsion bar system and sway control
    Recently replaced electric tonge jack
    Extra height box with electric winch rear door, diamond plate on rear door, fold down extension
    Extra wide side entry door.
    Black rubber coin floor with multiple floor tie downs for car and golf cart
    Spare tire well in floor plus storage
    Electric winch for lowering raising rear door, door diamond plate with fold out extension
    Electric winch to load car hardly ever used (we load it by hand)
    Lots of Pit Pal storage, door cady, fuel jug holders strap holders, areosol holder, 6 jugs
    Extra interior lighting, for both battery and generator power, NEW Optima battery
    Air compressor
    Fully stocked double Snap On tool box
    L-Shaped front counter cabinet, stainless top, upper aluminum storage cabinet, microwave
    Outside halogen pit lights, two, outside electrical outle
    Electric start 5500 generator, generator cabinet drivers side plus storage
    Brand new Optima red top battery plus spare battery
    RV exhaust system up to roof area
    Diamond plate on front of trailer, aluminum ladder to roof viewing area
    Pro jack storage box, floor jack storage, table storage, fan storage
    Shore power, extra interior wall electrical outlets, white aluminum interior
    Nice custom six aluminum wheels with great shape tires and brakes
    Too much to list, ready for your car and your on your way to the track, bring your own food

    WINNER, WINNER Chicken Dinner, first race this year April 7-8th NHRA Heritage race at SRP, we we're the number one qualifer and we won the race and a Wally. June 9th NHRA Heritage race at SRP, we qualified number six and won the race and our second Wally. This is a deadly consistent car and not someones used up POS. Get it while its HOT.

    Package pricing $80,000, on entire operation, or $60,000 minus the trailer, car has to go before trailer goes unless sold as a package, can assist with delivery for nominal charge.

    Contact Dana Wardell, phoenixmtrspts@gmail.com
    Tons of pictures and videos available. Check out on Face Book - Phoenix Motorsports


    e
     
    #1
    Last edited: Aug 10, 2018
  2. DANA WARDELL

    DANA WARDELL Member

    Joined:
    Jul 14, 2010
    Messages:
    269
    Likes Received:
    3
    Bumpty Bump
     
    #2

Share This Page