225" front engine dragster , a/fd parts, and more

Discussion in 'Noonan Classifieds' started by a/fd slngsht, Sep 12, 2018.

  1. a/fd slngsht

    a/fd slngsht Member

    Joined:
    Dec 2, 2004
    Messages:
    288
    Likes Received:
    1
    Automan down nozzle wrenches, with spark plug hole plugs, and tweezers!! 40.00

    10 oz co2 bottle $50.00

    Lenco co2 regulator pre set 200 psi .. $50.00

    Lenco air shift buttons. 2 , $45.00 ea..

    Rcd a/fd removable starter bracket for Tfx...375.00


    Two 4.500 bryant cranks both fresh mag.... Std crank, some stress cracks, still rings like bell $1200.00. Second crank, mains and rods are .010 under.. No cracks.. New main and rod clevite bearings included.. Mains are V, rods, are M .. $ 1500.00..

    Large automan carbon fiber scoop with mounting plate for barn door. $200.00

    Crower 10.5, 6 stand, 12 finger 4 dics a/fd clutch.. Fresh facings, current cert.. with discs, floaters, counterweight, and speed loader 3700.00

    225" front engine dragster.. 6.0 Chassis tag expired in july.. I will renew before sale...Mitler brothers fab 9.5 rear end with strange full floater.. Strange steel brakes, current taylor 7 point nomex wraped harness, isp pads, pour in seat,spe stearing box and spindles, weld alumastar front wheels, with m/t 2.25"*22" *17" tires, rear wheels are billet specialty 16*16 double beadlocks with m/t bubbas.. 13 gallon fuel tank, with 2.25 main fuel line, puke tank, co2 bottle, complete rpm data logger with 8 egts, g meter, two fuel pressure, oil pressure, map sensor, and digital dash and more,.. Rear canard wings, and front wing were made by neil and parks, front of frame, ( infront of front axle frame is removeable for easy loading and storage) 20 lb dj fire bottle system.. mckinny rub blocks, and titanium fuel shut off lever with detent,3 piece, 7/8 drag link,6' dual wheel wheele bar .. Motor plate for 426. Possible options are rear pro jack, and trick titanium 6.2 bellhousing driller for hemi and chevy, lenco*moore, and b&j.. Simpson fresh air system, Best et, 6.52., best 60' 1.04.. Please call pics available, pricing depends on how complete a roller you need.. Price starts at $13500...NEW CAR ON THE WAY!! SMALL SHOP!!!

    Strangs ultra case.. 3.812 bearing 40 spline spool, toms, 9.5 2.90 gear, with 40 spline, (1.75) pinion... Complete ready to run, all parts in excellent shape.... The gear set from tom was $1200.00. 20 runs On gear.. Was set up by strange, the bill for set up was over $1000.00 they had to do extra machine work to spool and pinion support..SAVE!!!
    $1750.00- complete, ready to run, or, minus third member(spool, ring and pinion, center support, and coupler) 1400.00

    Tfx 2002 block #1417. Standard main, standard deck,1.0625 lifter bore,4.187 bore, short stud thin sleeve,one oversize o.d. sleeve h-11, 9/16 head studs included, has been windowed.. Beautifull repair.... ready to run 3200.00

    msd 44 amp points box without revlimiter, tested by system 1... 300.00



    All prices obo...plus shipping Pics available...
    Mike taylor. 708-205-9052

    More parts comming soon...
     
    #1
    Last edited: Nov 15, 2018 at 10:15 PM
  2. a/fd slngsht

    a/fd slngsht Member

    Joined:
    Dec 2, 2004
    Messages:
    288
    Likes Received:
    1
    1.0625 crane lifters.. used, not used up $500
    Twin plug Keith black valve covers.. 450.00
     
    #2
  3. a/fd slngsht

    a/fd slngsht Member

    Joined:
    Dec 2, 2004
    Messages:
    288
    Likes Received:
    1
    Bump.. parts list updated...
     
    #3
    Last edited: Sep 28, 2018
  4. JJ Kumre

    JJ Kumre Member

    Joined:
    Aug 10, 2003
    Messages:
    39
    Likes Received:
    0
    How far out is the Motor in your chassis??
    Can you send pics to NTF713@yahoo.com
     
    #4
  5. a/fd slngsht

    a/fd slngsht Member

    Joined:
    Dec 2, 2004
    Messages:
    288
    Likes Received:
    1
    Sold parts removed, prices adjusted... and some parts listed on ebay... search "nitro hemi"
     
    #5
  6. a/fd slngsht

    a/fd slngsht Member

    Joined:
    Dec 2, 2004
    Messages:
    288
    Likes Received:
    1
    Prices updated.. bump!!
     
    #6
  7. a/fd slngsht

    a/fd slngsht Member

    Joined:
    Dec 2, 2004
    Messages:
    288
    Likes Received:
    1
     
    #7
  8. a/fd slngsht

    a/fd slngsht Member

    Joined:
    Dec 2, 2004
    Messages:
    288
    Likes Received:
    1
    Removed parts, added parts adjusted prices... Bump
     
    #8
  9. DANA WARDELL

    DANA WARDELL Member

    Joined:
    Jul 14, 2010
    Messages:
    281
    Likes Received:
    4
    #9
  10. ken_tli

    ken_tli Member

    Joined:
    Dec 4, 2007
    Messages:
    69
    Likes Received:
    1
    Nice car,
     
    #10
  11. a/fd slngsht

    a/fd slngsht Member

    Joined:
    Dec 2, 2004
    Messages:
    288
    Likes Received:
    1

Share This Page