Third Final of the Year for Ahten at Seattle Regional

Discussion in 'Alcohol Racing News' started by News Editor, Aug 20, 2014.

  1. News Editor

    News Editor Administrator

    Joined:
    Jan 13, 2007
    Messages:
    1,049
    Likes Received:
    6
    Third Final of the Year for Ahten at Seattle Regional

    Kent, WA. – Johnny Ahten’s performance statement at the LODRS Regional speaks volumes. Johnny not only had low ET of the event, but he reset the Pacific Raceways A-Fuel track record. He then parlayed his #1 qualifying performance into the final round, which was his third of the year. See a trend here? Even though Ahten fell to CleanBoost Performance Oil teammate Chris Demke in the final, the numerical threat the Island Renovations / Combust Filters Dragster displayed was more than enough to make it a memorable outing.

    “I am very happy with our performance, “said Johnny Ahten. “The Stump Puller was a monster and we ran on the edge the whole time. I am so proud of my guys the way we came back from a first round loss at the Seattle National event. It’s tough to lose, but it’s not so bad when it’s to the team leading the points. This was our third final of the year and Ahten Racing is confident going into the end of the year.”

    Ahten’s Seattle Regional adventure began with a test session on Friday. The plan was to run to 1000ft and shut it off. Johnny got a great start, motored down the track, and pulled the chutes early. The scoreboard flashed an expectedly slow 237 mph, but when the 5.22 ET lit up, it made people take notice. Saturday’s first qualifying effort was dashed in a cloud of smoke as the Stump Puller was flexing some muscle. In Q2, a clean start netted a 5.26@269 pass that would hold up for the #1 qualifying spot. In the last qualifying session, the cooler temperatures had the Ahten Racing team looking for glory, but it was not to be as the track was unable to hold the power.

    Sunday’s first round of eliminations began with a match-up with Jeff Ashwell. Johnny blasted off the line first and rocketed to a 5.202@269.73 to defeat Ashwell’s 6.022@179.59 effort. The run ended up being low of the event and reset the track record. It was also one of the quickest A-Fuel passes of the season. Second round was a battle with fellow A-Fuel racer Garrett Bateman. Here Johnny’s 5.273@267.85 dispatched a tire-smoking Bateman and it was on to the finals. Laying in wait was Chris Demke. Crew Chief Al Ahten and team partner Howard Katano backed down the tune-up and Bob Ahten, Chuck Costabile, and Kevin Covlell got the car ready. The record setting monster was ready to attack. All was well until one second into the run, when smoke poured from the tires of the Stump Puller. Just a toe over the edge of traction was enough to hand the victory to Demke.

    Johnny Ahten and the team will feed off of their Seattle Regional performance and ride the monster all the way to the finals at Pomona. Ahten Racing’ next outing will be the LODRS Regional race September 5-7 at Mission Raceway in British Colombia, Canada. To stay informed visit: www.facebook.com/JohnnyAhtenRacing

    Island Renovations understands the complexity of Hawaii's homes and their customers’ needs. Whether you are looking to build, remodel, or replace your existing windows and doors, Island Renovations is there to provide outstanding service and products to give your home added value with the satisfaction and peace of mind from a company that puts their customers first. Visit us: www.islandrenovations.net

    The Combust Filters Oil By-Pass Filtration System provides 3 Micron filtration, 100% Water Removal, Soot Removal, Extended Engine Life, Pollution Prevention, and Reduced Oil Consumption. By keeping the oil free of moisture contamination and particulates larger than 3 microns, your engine oil will have reduced Oxidation, Nitration, while maintaining required oil viscosity and TBN for proper lubrication. Our system incorporates only the best technology and quality construction for ease of use and installation. Features include an easy to read pressure gauge, 2 sizes of spin-on filters (7” and 12”), a push button oil sample valve, and a custom flow fitting to ensure a continuous proper flow. No internal moving parts to wear out! Visit us at: www.combustfilters.com

    Release courtesy of John Rogers
     
    #1

Share This Page