Separate names with a comma.
I might be mistaken but, I don't believe Santos had billet anything, just cast parts.
IIRC, All-Pro heads were on one of his fast combos.
no point when a 2-speed lenco CS1 is cheaper and stronger.
you're 3-400# low on injectors.
and if those are bosch/siemens running as high as 130psi, you are risking catastrophe, can blow the...
ad from last year but worth a try
what Brian said^^^
hit it with full timing for the first .1(tenth) and then ramp it in faster.
I bet it will take it all by 1.0sec without a problem.
maybe it's just that you old timers don't know how to use the interweb very well.
NAPA, they are usually about $1.99
Not sure why some people feel they need to pay $3-5 per plug.
Same as why you don't use anti-seize on a pressed bearing, but Loctite is.
no expert, but unless it's one of the oversized "trashcan" style it likely is closer to .125 as typical. even the normal "large" NOS solenoids...
What material for the Belleville washer? lots of choices, even Inconel.
timing needs to be somewhat close and more fuel(or less if it's spewing).
wouldn't hurt to use a modern delay box like a Mega-450 or similar to solve this and provide additional timers for other things like shocks,...
I'm nowhere near as experienced as Will or many others here but, I agree with Will in not getting too caught up in all the small increments, if...
tighten the slips, lower the engine angle, more power-- all adds up to less bite/more wheelspeed.
I think you are answering your own questions/...
I've got a 3-speed with two 1.41 sections and reverse w/pods, 32/35 spline, like new. Make it into a 2-speed and have a spare. $2600
was the nose weight the same when you ran it lower?
might be too heavy in front to use the bar correctly.
I've never been that quick in my old...
not saying you're doing anything wrong, far from it, but why not try lowering the bar a little? gradually. might go quicker by the time you're...
deal with Sanders, great people.
Helped me with replacement wheel centers for Spinwerks junk.
Seems like people make a big deal out of something so simple.
A button to bypass the delay/timers has been used for decades by bracket and .90...