Separate names with a comma.
Oh...never mind.....The sizer psi would then be the idle pressure !!!
It needs to be above idle pressure....
But just a few lbs above idle would work?
If he is "sizing" the pump...why not just jet it for the GPM he does not need and set psi check valve less than idle pressure so it is always...
???????? The mag takes a different rotor mount to position the rotor correctly for each rotation.
I use an old ceramic style crock pot. Only does 5 qts at a time...but easy to handle. And safe.
2010 Rooman (Keith Bugan) 200" FED 23" wide Roll cage
Full Aluminum chute pack body.
429 all aluminum Pontiac built by Freedom Racing Engines,...
I was told Blue on all cam drive bolts. The reason was ...if there is a harmonic going on in the engine....the red loctite will turn to powder and...
Enderle 110 @ 17.2 GPM ????
A fellow racer asked if I had any head studs he needed...I did not.
But the question came up ....who makes studs on a short run.... reasonable?
DJ Safety......mine have rubber soles ...so they are shoes.
I mounted my spare tire on the outside of the rear door. It clears the ground when open. Not having to root around in the trailer for the spare...
Thanks Dale...that is what I was looking for. I tried "googling" the info. and got nowhere.
I see Brad Penn is now Penn Grade 1. and the Penn Grade 1 is listed as partial synthetic.
I have heard that they changed the formula....and not...
Thanks guys.....I feel like a kid again!!!!
Wait until your 66.......it gets worse !!!!!
I'm confused on your post Mike.....I think you are talking about something totally different than Rays"Clickfast" ....It adjusts the...
Glenn talked to Ray......he said he stopped advertising because it wasn't cost effective. He is still making them.
Thanks h2b puller !!!!!
Ok...I can't find where to buy a click-fast barrell valve adjuster !!!
Got my answer !! Caled RBS and got Enderle's ph. #
The coated/relieved side goes toward the gears......the ground side is out. It is ground to...
I acquired a Enderle SG810 fuel pump. It is the twin gear billet pump. I took it apart to check and lube it and I'm not sure it is together right....