Separate names with a comma.
all good info. thanks all
thanks i'll look at cdi
thanks for the replies. still using my old Blackhawk but it hasn't been calibrated in over 40 years. think I'll have to chase down the snap-on...
do you ever get your wrench calibrated . who do you have do it?
looking for a new torque wrench. what do you like, click style, digital, what brand ? thanks bob.
what are the pros and cons between a wet sump and a dry sump system besides ground clearance.
what are best for the hemi ball and cup or ball on both ends of the pushrods.
what length range do I need for a short deck hemi with bae 8x heads. who makes a good set.
what block and heads is the Hogan's manifold for.
what temp are you warming your oil to before a pass, and what is the temp after a run. do you cool your oil between rounds in the pits if so what...
t&d steel rocker setup for mbe heads 1.7ex 1.9in very nice shape. asking $3500.00 shipped. bob 320-760-5274
looking for full rocker setup for bae 8x heads. prefer push rod oiling and roller tips let me know what you have. thanks bob. 320 760 5274
putting together a bae hemi. looking for cam info target hp is 1300 to 1500 hp, will be procharger at low boost. my question is. do you have any...
still looking. can be usable or lightly damaged.
looking for a cam to regrind. must be for a bae hemi with 2.125 di,"54mm", 48 degree, 2" lifter spacing with around a 114 lobe separation. let me...
thanks for the reply, looking at a new callies 4.350 that is on racing junk . it was built in 2006 and never used it is a forged unit not sure how...
has anyone had any experience running a 2.20 rod in the hemis. pros - cons
still looking for gear drive and -500 bae intake
we have the oil pump. thanks for asking.