Separate names with a comma.
Your msd coil and box what box
Thanks guys I will change the headers remove the wicker bill and add more wing
[IMG] [IMG] This is what [IMG] the wing looks like now having a new wing made 65" The top picture is after we moved the wing back and up 12:
very interesting does hoosier make a 36" tire
Our tracks are marginal at best and it does it at all tracks some worse than others ,they don't seen to prep the tracks past 1/8 mile
We also put...
ok the wing is solid mounted and we used areo tubing the wing is 48" by 18.5 ,we also moved it higher and back to to get it in clean air ,the wing...
Mike we gone from 4 to 8 degrees and no difference we also add a 1" wicker to the rear of wing,and we started with a 1/2" wicker,we also changed...
its a 125" wheel base and yes I hane a wing on the car.
Were losing traction on top end and the car gets lose,the driver says that he can also fell it .
Replaced the rear tires 8 months ago
I have a altered with a 540 brad fat head with a 206d at 92% with a lencodrive 3 speed 28% and 31%, with a Goodyear 36" tire with a 4.30 gear...
We replaced the outside lights with leds
LED Panel for RETROFIT 300W/500W FLOOD LIGHT Halogen light fixtures -- 7000Lumens 33Watts -- Cool White...
Looking for a drce alumunim block
We back up in high gear and when we start moving foward thats when we put in low gear ,because when we tried to back up in low gear the brakes...
If it's a Lenco drive put it low gear 'then it will free wheel,we use the air parachute for this and release the presure from the pod .
Give me a call about the cases.
520 248 0400
ANY ONE H[IMG]AVE ONE FOR SA
Multi-Stage Fuel Manifold
I'll take the old grid
do you still have Morel lifters?
i'll take tthe points box