Separate names with a comma.
wiring If it is the box that starts on the mag + changes over to the crank trigger, I be-leave the wiring is on his site. Tried to contact him...
congraulations You did a great job. 2 things to remember, 1: If the rods are still in it + it's shiny side up you had a great day 2: The worst...
over drive Nice combo You may not see that much difference, because of the heat the higher overdrive was making.Good luck and keep me posted....
sleeves Sassey Racing New Hamp. Don
sleeves Most any good quality machine shop that does race motors should be able to do it. They need the jig. I know about 3 machine shops that do...
switch Maybe you can try + call Snyder They are very good @ lencodrives. Don
sleeves Yes Yes Yes
spring compressor I use a MTI but it may depend on air pressure required. I never shopped around for mine. Just bought it when needed. Don
hose for breather A -10 hose is just 9/16 in inside diam. I would run something a little bigger. There is a reason that a min. of 1 in is...
converter ATI says leave as low as you can + still get a good reaction time. Let the converter do what it is suppose to do. But then most of us...
Lifter check and see if the lifter spread or forked on the roller end. Don
heads Just stay away from the cast stuff. even the solid heads. You can change head stud location on the block if it isn,t started. also the...
heads If I spent all that money I would be calling CFE. There billet stuff is aw sum. Don
blower noise WOW Race cars + angry neighbors. go figure. Mine have been pissed for years, Some how they don't think my 5.80 dragster is a cool as...
That would be alot of weight.like spinning two large flywheels let alone other differences. Don
blower Try calling Billy @ Oddy's. Jim ran them for years. Or call BDS direct, on the gear info. Good luck Don
vp funny car I only know of one built, and the customer was in Japan. Was up there the day it was getting shipped. It did work really well.It was...
crank Not a problem new. Had great luck with Callies years ago. Don
measurement Thank you so very much. Just may fit. Don
phone Thank you Don
