Separate names with a comma.
helmet Call helmet city they will know Don
bearings M 's are a little softer. If you are just learning run the M so you need to check often.
reverser Not to different from the CS2 I ran in my TAD for years Thanks Don
Won't start Look + make sure that the male plugs have the pins all the way down. Also that there are good grounds. Also DO NOT plug the red end...
helix Try 9000 if you are comfortable.
LW trans oil I goggled redline oil 'clicked on trans scroll down + it's on the bottom. says it's $10.95 qt. or $43.95 gallon. no modifiers, flash...
trans cooling Yea tell us about this red Line oil. I have been having trans clutch problems for a year. I am sure Red Line doesn.t want it to...
I am going to be looking for a 2 speed lenco drive in a few month's. I was wondering what anyone with experience thinks is a good price range to...
filter a K+N Valve cover filter. On a piece of alum tubing. Don
problem fixed Isn't it really a good feeling when the stars line up + and ugly problems get solved. It sure is for me. Good luck Don
timing You probably are right, with the 36 degrees.The old paper work showed 38 degrees on the dyno, with highly modified heads. on a 496. but I...
pushrod Thank you Terry Manton for your time and wisdom. I would of never thought of that. Don
timing I think I ran somewhere between 30 + 32 depending on conditions. Don
stroke I would say the stroke depends on your car weight, type of race track prep. RPM,s supercharger and other factors. Just remember what a...
Got back last night. From a fun weekend @ Reading.Couldn't get the smile off my face. I need to call Manton on Tuesday, but I am burning # 2...
pressure Try it different ways + see how your set-up likes it. No ones system are the same. If you are looking for free advice, I am sure someone...
B+j I called US trans with a few questions on there unit when looking around. All I can do is speak for myself, but they talked + acted like I...
crank Man, I am truly sorry for that! I really don't know what to do say. But the machine shop would have a face full of me, and a phone call...
port nozzels I tried it last year, had no success it kept puddling large amounts of fuel in the cyls. It was something I had to try, + I had 2...
My tuner is moving to far away, so I am looking for Someone who knows Fuel ,+ Mag management. I have a tune up now, and don't need to change...
