Separate names with a comma.
Looking for ratios 1.25 through 1.35.
In need of a 33 14mm GT pulley, used in good condition would be great.
Phone is fastest 303-981-8564
Who has used a dribbler setup, and what worked vs what didn't work?
What is the best location for a pan pressure sensor?
The goal is to shift twice at the same rpm. The car is uses a grid, and a b&j. The grid supplies 1 programmable output signal that can be used for...
Brad Anderson black stand rocker arms. High ratio exhaust, in good condition.
Call Tom 303-98one-856four.
I have pics, they will not load.
Has anyone ever done a test for how much oil comes through the head, where it enters the rocker stand.
I've been having a push rod issue. Ran a...
Looking for a M4 set back plate.
303 981 85six4
Looking to buy a Leahy 3.0 command module.
Thanks ITA !
92 tfx. I changed from a dual key to a splined crank. The hub diameter was 2.188 now its 2.365.
Has anyone else made this change? What seal did...
Are all 92 tfx blocks raised cam blocks?
Looking to see what's out there. Need a 4.25 2.75 8 bolt crank. No junk please.
Tom 303 081 8564
Does anyone have a rod vise for sale?
Thanks Tom 303 981 8564
What is the recommended max speed for a hh1471 on methanol?
The more timing that is removed the lower power out put correct? Have trouble with the first 10 feet.
Looking for a used FIE 4 port control manifold with valves.
303 981 8564
I changed a 125" McKinney car over to a converter car. When done the fire bottle activation handle is mounted under the upper rail left side as a...
In need of a flex plate, hemi pattern, does not need current sfi cert.
303 981 8564
What are the advantages of retarding the timing at high rpm's. Example a roots car turning 9000 max would it be an advantage to pull timing out...
Can someone share a flow chart for main pills from 150 thru 250 @ 150psi.