Aluminum corrosion

Discussion in 'PSI Superchargers Tech Questions' started by DQUES, Aug 7, 2019.

  1. DQUES

    DQUES Member

    Joined:
    May 20, 2004
    Messages:
    650
    Likes Received:
    6
    I had to run a tap in the 1/8th NPT threads on the under side of my blower case rear and removed the hard anodizing . Alcohol will puddle in the exposed threads , is there anything I can put on the now exposed aluminum to prevent the alcohol from attacking the raw aluminum ?.
     
    #1
  2. OwnBlock

    OwnBlock Member

    Joined:
    Jun 12, 2006
    Messages:
    238
    Likes Received:
    3
    you could try caster oil. i use it in my fuel as a lubricant, it leaves a thin film in the base of the tank
     
    #2
    Last edited: Aug 8, 2019
  3. MaineAlkyFan

    MaineAlkyFan Active Member

    Joined:
    Oct 8, 2006
    Messages:
    364
    Likes Received:
    53
    PJ-1 Black Chain Lube. Stays put, methanol will not eat it. (fuel check & longevity).

    Chris Saulnier - Team Tigges
    Mechanic Falls, Maine
     
    #3
  4. promodracer

    promodracer Member

    Joined:
    Jan 8, 2008
    Messages:
    359
    Likes Received:
    2
    ??? Jp1 or pj1...
     
    #4
    GregM784 likes this.
  5. MaineAlkyFan

    MaineAlkyFan Active Member

    Joined:
    Oct 8, 2006
    Messages:
    364
    Likes Received:
    53
    PJ1. Product Number 1-22. Blue Label.

    [​IMG]
    [​IMG]
    Chris Saulnier - Team Tigges
    Mechanic Falls, Maine
     
    #5

Share This Page