Misc Fuel and Alcohol Lenco, Racepak, AFT, Morel, Reid and more

Discussion in 'Noonan Classifieds' started by nitrostacker, Dec 12, 2018.

  1. nitrostacker

    nitrostacker Member

    Joined:
    Nov 3, 2009
    Messages:
    113
    Likes Received:
    0
    4 run 1/8 mile 10” us gear 456 ring gear and pinion. Pro gear no cracks. 400.00
    1 1/16th Crane Lifters 550.00
    Victory titanium valves intake and exhaust coated
    10-intakes 2.550/6.400/.250 tip bead
    9-1.950/6.200/.250 tip bead
    60.00 each 10 runs 1/8 mile
    Victory dual titanium retainers 10 run 1/8 mile
    10-FRT-002-8
    12-FRT-002-8 +.050
    11.00 each
    PAC dual spring 1331 10 run 1/8 mile
    10.00 each
    CS1 56 and 37 gear sets, 1 gear set with clutch basket 625.00, 1 gear set 600.00, 4 input shafts 175.00 each, 2 inner shafts one new 137.50 each, 3 new pan filters 7.00 each, transbrake disc 9 67.50 new, transbrake floaters new 22 110.00, 1 stator support 237.50, 1 pump set and housing 162.50, 2 new sprags 55.00 each, inner and outer races for the new 125.00 per set, 1 shift fork 40.00, 1 set of shift plates 123.50, 1 new reverser rear plate 55.00, 1 reverser slider gear 25.00, I reverser shifter bracket with shift tower 50.00, 1 new gear set eliminator 73.50, 1 shift pod 70.00, 2 new form sprags helicopter 325.00 each, 1 new inner and outer race for them 125.00. 3 speed transmission blanket cs1 75.00
    Racepak items v300 main harness used for dragster 100.00, pro 1&2 egt harness 175” 100.00, new pro1&2 tdc cable 19” 35.00, pro 1&2 mag phase cable amp plug 52” 35.00, new vnet terminator female cap 5.00, pro 1&2 fiber optic pickups 50.00 each, vnet analog box 55.00, 2” travel linear for pedal 110.00, n2o fuel psi vnet module and sensor 110.00 3 of them, vent zx flow meter module and cable 50.00, vnet front wheel rpm module and cable 50.00, vnet 0-5 volt boost module 50.00, vnet 3000 psi pressure module and sensor 120.00, racepak analog oil pressure gauge for vnet with cable and module 85.00, pro 1&2 analog box transducers 0-5,0-5 out, batt voltage and g meter all 50.00 each
    Tool steel 7/16 Hemi inner head studs 4 1/4 long 80.00 per set of 8
    1 Leahy long crank trigger 50.00
    3 BAE std hemi exhaust rockers 7/16 125 each
    3-Sets of Good GRP hemi alcohol rods 7.166 length 6-10 run rods all 1/8 mile. 300.00 Set
    3- styles of new blower studs 7/16-7/16,7/16-1/2,7/16-1/2 with shoulder all 35.00 per set
    1-New SCE KB/Bae hemi oil pan gasket steel core 40.00
    Like new set of Reid fat head rocker stands with updated oiling. 800.00
    1 set of .904 morel Hemi lifters 20 runs 375.00
    2 AFT 10 1/2 aluminum hemi pedal clutches 2 disc complete 500
    New AFT clutch bellhousing linkage arm. 60.00
    1 new rcd 14m-1610-65ps belt 180.00, all 8mm belts are one run 1/8 mile belts 8m-1600-84ps, 8m-1600-75-ps multiples of both 40.00 each, one run 1000 ft 11mm belts 11m-1585-84ps 40.00 each
    New rcd tfx driver side trigger bracket and timing pointer 45.00
    New rcd tfx tdc bracket and holder 45.00
    New rcd tdc pickup straight 75.00
    3 good bae fuel cliff style exhaust rocker arms 7/16 adjuster 100.00 each
    Nice kobelco 4” blower snout and quill shaft 400.00
    One set of diversatech titanium fuel valve covers. Will not certify. They work fine one valve cover had a couple of welds on top that they did not do so they wouldn’t certify. Comes with spark plug tubes and burn down breathers 3500
    These are the moly steel in 9/16 and 9/16 12.625 58 Used 6 New, 12.325 33 Used, 7 New 12.250 19 Used, 12.625 Taper Stud 24 Used 12.500 2 Used, 3 New, 11.500 6 Used, 11.000 7 Used, 1 New 8.00 each
    Tool Steel Studs 9/16-1/2 8.970 159 Used 1 New 18.00 each
    New L19 Corner head studs for tfx or BAE 13.00 each
    New Can of peanut butter torque compound 45.00 each
    Good Pilot Chute 50.00
    Call Scott Gaddy at 704-778-6974 or nitrostacker@gmail.com
     
    #1
  2. Top Drag

    Top Drag Wally Stelmach TD5560

    Joined:
    Jul 4, 2007
    Messages:
    9
    Likes Received:
    0
    do you still have Morel lifters? if yes what kind of shape? Thanks.
     
    #2
  3. GTPerf

    GTPerf Member

    Joined:
    Oct 22, 2006
    Messages:
    204
    Likes Received:
    5
    Do you still have the 2 AFT 10 1/2 aluminum hemi pedal clutches 2 disc complete 500.
    Billy 540 598 4949
     
    #3
  4. hydrotherapy

    hydrotherapy Member

    Joined:
    Oct 12, 2004
    Messages:
    258
    Likes Received:
    3
    #4
  5. Nitroholic

    Nitroholic Member

    Joined:
    Jun 25, 2017
    Messages:
    31
    Likes Received:
    0
    do you still have the 37% CS1 gear set .
     
    #5
  6. nitrostacker

    nitrostacker Member

    Joined:
    Nov 3, 2009
    Messages:
    113
    Likes Received:
    0
    I do not sorry
     
    #6

Share This Page