can anyone weld magnesium

Discussion in 'PSI Superchargers Tech Questions' started by blownapex, Apr 21, 2019.

  1. blownapex

    blownapex Member

    Joined:
    May 25, 2006
    Messages:
    507
    Likes Received:
    4
    i have a lenco drive that has been timeserted and several pulled out
    can any one out there weld this up and redrill these holes
    front plate bolt holes in case over transbrake clutches
     
    #1
  2. thexpressteam

    thexpressteam Member

    Joined:
    Nov 2, 2008
    Messages:
    61
    Likes Received:
    1
    call George Sitko 562)243-0482
     
    #2
  3. OwnBlock

    OwnBlock Member

    Joined:
    Jun 12, 2006
    Messages:
    238
    Likes Received:
    3
    a tapper insert has a larger outside diameter to the time sert / heli coil size. loctited / retaining compounded in these work great giving a larger grip diameter. I use these without any retaining just threaded in. in between the heli coil / time sert size ( which are the same thread) you could try a key sert, personally go straight to the tapper sert.
     
    #3

Share This Page