10.5 molinari titanium Clutch Center support

Discussion in 'Noonan Classifieds' started by blown1969camaro, Jul 18, 2018.

  1. blown1969camaro

    Joined:
    Apr 18, 2010
    Messages:
    455
    Likes Received:
    2
    I have a complete Molinari MRP racing clutch, Titanium clutch, center support clutch. Was certified December of last year and was purchased new the year before that. Clutch has been used a total of 15 runs since new. and has been checked over by Mr. Molinari since then. I wanna say I spent 9K for the clutch. I am looking to get 4,500.00 out of the clutch now.

    Includes:

    Flywheel
    pressure plate
    Stands
    2 extra flywheel studs
    nuts and washers
    No flywheel to crankshaft bolts
    2 sets of levers (one Newberry style, one Boggs style)

    The set of levers on the pressure plate now are designed for Bob Newberry they are a more aggressive lever then the clutch originally came with.

    The set of levers that the clutch came with were designed for more like Steve Boggs runs. They are less aggressive and will rely more of timing adjustments.

    This is a really nicely designed piece, I have 3 clutches now and would like to get some more testing with this clutch but I don't know when I will ever have the time. Also I'm pretty broke right now so I am selling off some of my extra stuff that I have not used in the last year.

    Thanks much
    Aryan Rochon
    aryan@rocycle.com
    Texting is good
    813-789-5875
    Rocycle
     
    #1
  2. blown1969camaro

    Joined:
    Apr 18, 2010
    Messages:
    455
    Likes Received:
    2
  3. blown1969camaro

    Joined:
    Apr 18, 2010
    Messages:
    455
    Likes Received:
    2
  4. blown1969camaro

    Joined:
    Apr 18, 2010
    Messages:
    455
    Likes Received:
    2
  5. blown1969camaro

    Joined:
    Apr 18, 2010
    Messages:
    455
    Likes Received:
    2
    christmas special
     
    #5

Share This Page