Engine won't run on crank trigger

Discussion in 'PSI Superchargers Tech Questions' started by bossman, Jul 21, 2018.

  1. bossman

    bossman Member

    Joined:
    Jul 10, 2009
    Messages:
    66
    Likes Received:
    0
    The engine will start and run fine on the mag, as soon as I switch it over to the crank trigger the motor stops. Its a 44 mag with a grid and all the ignition just came back from Electrimotions .
     
    #1
    bossman, Jul 21, 2018
  2. Critical Mass

    Critical Mass Member

    Joined:
    Aug 5, 2010
    Messages:
    169
    Likes Received:
    4
    First thing that comes to mind is phasing. Make sure that the crank trigger is facing one of the magnets when the mag is on #1.
     
    #2
    Critical Mass, Jul 21, 2018
  3. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    So you have the cranktrigger plugged into the gray cable going to the Grid and you the white wire from the Grid going to the upper plug on the mag?
     
    #3
    Mike Canter, Jul 21, 2018
  4. bossman

    bossman Member

    Joined:
    Jul 10, 2009
    Messages:
    66
    Likes Received:
    0
    I found the issue. broken wire on the cross over switch thanks
     
    #4
    bossman, Jul 21, 2018

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM