Complete Lencodrive sale. 2 ea 3 speed units with (1.25/1.25 ratios), bellhousing and converters

Discussion in 'Noonan Classifieds' started by Will Hanna, Jun 4, 2018.

  1. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    Selling complete Lencodrive combo with spares. Will part out or sell as package.

    2 each - Lencodrive big shaft with mega 1.25 input. 1.56 low gear 3 speeds (1.25/1.25).

    Both units new transbrake clutch pack. Both units modified to run cooler through charge circuit so converter will get cooled as well. Both units have DLC Coated pump gears with oiling mods.

    $6950 each OBO

    Boninfante 7.2 Aluminum Bellhousing for Hemi. Has pocket for Ford flexplate starter (McAmis location). Blowback tabs welded on. Has inspection cover. In cert. $1250

    Coan steel converters. Will check on part numbers, but was the 'standard' Snyder Lencodrive converter they used to sell. $1000 ea.

    Taylor Lencodrive 3 speed blanket - $250
    Stroud Lencodrive 3 speed blanket - $200

    Rear case with pod for 3 speed. Comes with intermediate shaft, sprag assembly and pod/fork. Bolt on and add gear set. - $750 OBO

    Numerous spares available. Will put a list together.

    Will consider a package deal on all or some parts of this.
    Pics available

    Will Hanna
    979.415.4959 (no calls or texts after 9 p.m. CST)
    will.hanna@insidetopalcohol.com
     
    #1
    Will Hanna, Jul 5, 2018
  2. SMOKIN JOE

    SMOKIN JOE Member

    Joined:
    Nov 23, 2006
    Messages:
    250
    Likes Received:
    1
    How much $ for 1 or 2 1.25 gear sets ? I have 1.35 thru 1.46 I could trade in also if needed.
     
    #2
    SMOKIN JOE, Jul 5, 2018
  3. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    He is not looking to part it out.
     
    #3
    Will Hanna, Jul 6, 2018
  4. 23T Hemmee

    23T Hemmee Member

    Joined:
    Jul 10, 2007
    Messages:
    449
    Likes Received:
    0
    Hi Will,

    Is the bellhousing still available? Not familiar with the McAmis starter location. Can it use a Mopar 130t flex plate or does it need a larger diameter plate and Ford starter. Got a Plueger nitro chassis so ground clearance and width is minimal. He wasn't building them with on-board starter in mind.
     
    #4
    23T Hemmee, Jul 9, 2018
  5. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    The bellhousing is currently configured for a midplate mount Ford starter. Jeff Bohr just confirmed that it can be converted to any starter pocket location.
     
    #5
    Will Hanna, Jul 11, 2018

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM