CRANK TRIGGER LEADS

Discussion in 'PSI Superchargers Tech Questions' started by NITROBANDIT1, Feb 6, 2018.

  1. NITROBANDIT1

    NITROBANDIT1 LOST IN SPACE

    Joined:
    Apr 18, 2005
    Messages:
    653
    Likes Received:
    2
    setting up a new crank trigger setup and wondering whos is best, and why. I see msd, and they have 2 connector styles, fie, leahy, and the guy walking around pomona selling his. any ideas before I buy the holders, since it seams those are all different too? engine is a Fontana with 2 pickups. thanks, dan
     
    #1
  2. youngtuner

    youngtuner Member

    Joined:
    Mar 24, 2004
    Messages:
    956
    Likes Received:
    5
    What are your brackets? Threaded or smooth? All the Crank triggers are a 2 pin square connector with a ground strap. The 3 pin connector is top dead center.I personally have used Leahy and MSD. MSD has a metal shielding that takes a bit more abuse. Either is a good choice.
     
    #2

Share This Page