MT tires with Hoosier liners??

I have the old Goodyear two-way valve & liner setup on 17"x 16" Centerlines. Has anyone used the current Hoosier liners with MT 3187s ???
Doug Cobeen

 

M/T tires

As far as I know M/T's were designed to be used on bead locks

 

We run the current Hoosier tubes / liners in our M & H slicks, for 3 years now, look almost identical to the old Goodyears, except for the valve stem

 

Hi
did you drill another hole in rim and where did you drill it. and did you use an normal bolt in valve stem
Thank you
Rickl

 

These are the MT 3186's with Hoosier liners on a set of Sander non beadlock rims. (knurled around the inside rim edges) The valve stem for the outer is out close to the rim edge and is pretty specific to location so the air passes thru the channels in the edge of the liner. These valve stems are smaller than standard valve stems (but use the same schrader valve) and thread into the rim. We got the them from Hoosier also. If your interested I can send some better pics of the assembly to you after work.

Haven't run these yet but don't really expect any problems. I believe there are a few Nostalgia Funny car guys that run this setup also.

Steve