Big NEW list of parts for sale! Engine, Ignition, Driveline & More!

Discussion in 'Noonan Classifieds' started by Will Hanna, Feb 2, 2015.

  1. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    I just got some more parts in, so here's the new list. If you are looking for it, drop me a line!

    Engine Hardware -

    -PSI Top/Bottom pulley combo for 92 over. 8 mm. 71 bottom/37 top - $250 for the combo
    -RCD TDC Pointer/Crank trigger mount. Old style drop in pointer - $150
    -Gorr "All in one" 20 port distribution block. Run your blower nozzles and port nozzles (up to 16) with 3 different check pressures. Trick billet deal - $400
    -7 used Darton sleeves. Just have a bunch of runs on them. Would make good 'emergency' spares. $150
    -Manton 3/8 push rods - 11 15/16" and 11 1/2" . Complete set with spares (6 intake/8 ex)- $150 OBO
    -1 ea new upper Clevite thrust (V style) - $15
    -4 ea new upper/lower Clevite main bearings (M style) - $40 for all
    -TAK Titanium blower restraint mounts - $350 (all 5)

    MSD/Ignition/Electrical

    -MSD Red coil - $150

    Clutch/Trans/Driveline -

    - MW 40 spline live axle - $250
    - 4 ea NEW Crower 10" small stand floaters (small ID) - $200 for all 4
    - AFT 10.5 6 finger Centrifugal Lock up clutch. This is the TAD/TAFC/Pro Mod legal clutch that has 3 standard levers and 3 lock up levers that are spring loaded to make them come in later. It's not the outlaw style multi-stage lock up clutch that uses a solenoid to control the throw out bearing. This unit has low runs and will be recertified for buyer. This is a pedal style clutch, not a glide $1500 OBO
    - B&J input shaft - $100
    - B&J intermediate shaft (short for dragster) and double female coupler (shaft to shaft) - $100
    - B&J Long male coupler - $75
    - B&J Short male coupler - $50

    Chassis/Accessory parts -


    -Small CO2 Bottle - $45
    -New set of straps for DJ/Diest carbon bucket (leave the straps on your car and send these for recert) - make offer
    -BG Weather Station(partial) - calculator needs battery, altimeter is there but missing weather station. Pelican case included. - make offer
    -3 ea Normally Open Whitey valves - $100 for all 3
    -NEW Taylor Engine Diaper for FC/Pro Mod - $750

    Tools/Support -

    - On-head flip style spring changing tool for Fathead style head (does intake and exhaust) - $125

    Pics available on request.

    I prefer a text or email.

    Will Hanna
    979.415.4959
    will.hanna@insidetopalcohol.com
     
    #1
  2. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    bump

    front row!
     
    #2
  3. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    bump

    to the top!
     
    #3
  4. Prospector

    Prospector Member

    Joined:
    Sep 28, 2003
    Messages:
    300
    Likes Received:
    0
    Hi will
    I have a set of carbon brake's calipers and pads and rotors that wont work on my car.
    Are yours just the rotors?
    Jay

     
    #4
  5. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    sold

    Sorry rotors were sold last week.
     
    #5
  6. Wayne Butler

    Wayne Butler Member

    Joined:
    Sep 4, 2007
    Messages:
    119
    Likes Received:
    0
    fuel management

    i am looking for a electric 4 pole and controler box
     
    #6
  7. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    Sorry don't have one

    Sorry I don't have any electric fuel management at the moment.
     
    #7
  8. Sheppard racing

    Sheppard racing New Member

    Joined:
    Jul 3, 2014
    Messages:
    50
    Likes Received:
    0
    Will the head spring tool work on veney's?
     
    #8
  9. NITROBANDIT1

    NITROBANDIT1 LOST IN SPACE

    Joined:
    Apr 18, 2005
    Messages:
    653
    Likes Received:
    2
    #9
  10. Sheppard racing

    Sheppard racing New Member

    Joined:
    Jul 3, 2014
    Messages:
    50
    Likes Received:
    0
    Must be on vacation
     
    #10
  11. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    replies

    Sorry for the missed replies. The valve spring tool will not work on a veney and I had a sale pending on it when you asked.

    I will get you the measurements on the floaters tomorrow morning.
     
    #11
  12. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    front row

    bump to the top
     
    #12
  13. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    front row

    still some good deals on parts here
     
    #13
  14. Nitro Guys

    Nitro Guys New Member

    Joined:
    Feb 22, 2014
    Messages:
    14
    Likes Received:
    0
    #14
  15. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    clutch

    The clutch is a pedal style clutch. It just has 3 lock up fingers that are centrifugally controlled, not throwout bearing controlled, so it is NHRA legal.
     
    #15
  16. Will Hanna

    Will Hanna We put the 'inside' in Top Alcohol
    Staff Member

    Joined:
    May 6, 2003
    Messages:
    6,706
    Likes Received:
    132
    front row

    bump to top
     
    #16

Share This Page