Total Flow Heads

Discussion in 'PSI Superchargers Tech Questions' started by bruce boland, Jan 19, 2014.

  1. bruce boland

    bruce boland Member

    Joined:
    Dec 29, 2008
    Messages:
    508
    Likes Received:
    1
    Anyone still running these Billet Total Flow Heads on a Brad. How are they and what do they compare to Brad 5 , 6 , or 7
    Thanks Bruce
     
    #1
    bruce boland, Jan 19, 2014
  2. drn1013rd

    drn1013rd Member

    Joined:
    Aug 23, 2006
    Messages:
    186
    Likes Received:
    1
    total flow

    Marty Thacker and Andy Bohl run them.
     
    #2
    drn1013rd, Jan 20, 2014
  3. Soldierboy0098

    Soldierboy0098 Active Member

    Joined:
    Feb 17, 2006
    Messages:
    1,416
    Likes Received:
    16
    Total Flow

    Hi Bruce,

    I have flow sheets on the old Total flow fatheads vs. the BAE 6's and the Total flow heads flow slightly better on the intake side than the 6's and on the exhaust side they flow the same at the peak lift but the BAE 6's flow better below the peak lift.

    Marty Thacker and Andy Bohl have both run very well with the old ones and the new ones, Also Steve Sanchez seemed to be a pretty good guy when I spoke with him.

    Hope that helps a bit,
    Trevor Sherwood
    727-364-4368

    P.S. Thanks for selling Jim his dream ride...he loves that thing.

     
    #3
    Soldierboy0098, Jan 22, 2014
  4. eli

    eli Banned

    Joined:
    Dec 24, 2005
    Messages:
    1,657
    Likes Received:
    1
    Steve Sanchez Like myself is all about the ex port , you can pump all the air/ fuel into the engine you want,
    If you cant get the burnt fuel out you cant make HP, We will be using Total Flow heads on our TA/FC,
    Gene Terenzio Sr.
    By the way The Brad 6 heads I made 40 years ago on our (The Italian Way) BB/A








     
    #4
    eli, Jan 22, 2014

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM