Accumulator feed Big M

Discussion in 'PSI Superchargers Tech Questions' started by Vhodoo Racing, Oct 13, 2011.

  1. Vhodoo Racing

    Vhodoo Racing New Member

    Joined:
    Jan 5, 2011
    Messages:
    99
    Likes Received:
    0
    G'Day

    What is the best feed in on a Dart Big M block for an oil accumulator? Should I use the threaded hole located on the filter boss (oil feed to the filter) or should I T into the oil filter outlet at the remote filter adaptor to get the feed more direct to the bearings?

    Cheers Pete
     
    #1
  2. craig moss

    craig moss Member

    Joined:
    Sep 29, 2006
    Messages:
    574
    Likes Received:
    6
    I have mine t'ed off of the side of the filter boss. dont know if it's the best place just where it ended up.
     
    #2
  3. Vhodoo Racing

    Vhodoo Racing New Member

    Joined:
    Jan 5, 2011
    Messages:
    99
    Likes Received:
    0
    Hey Craig
    Are you happy with the way works?

    Pete
     
    #3
  4. craig moss

    craig moss Member

    Joined:
    Sep 29, 2006
    Messages:
    574
    Likes Received:
    6
    I haven't had any oiling failures so Yea. But I don't know if its plumbed in the system the BEST way. It works that's all I know.
     
    #4
  5. blowntorana

    blowntorana New Member

    Joined:
    Apr 10, 2009
    Messages:
    28
    Likes Received:
    0
    pete,
    plumb it in to the back of the block,it goes directly to the main feed it will work better there.
    worked for me..
    brian
     
    #5
  6. Vhodoo Racing

    Vhodoo Racing New Member

    Joined:
    Jan 5, 2011
    Messages:
    99
    Likes Received:
    0
    Gday Brian....

    How you doing???? In the oil pressure feed you reckon?

    Cheers Pete
     
    #6
  7. moldenhauerracing

    moldenhauerracing New Member

    Joined:
    Jul 31, 2011
    Messages:
    171
    Likes Received:
    0
    Plumb it to the back of the block with this system your looking for volume using this port you will have the least amount of restriction.Hope this helps good luck.
     
    #7
  8. Vhodoo Racing

    Vhodoo Racing New Member

    Joined:
    Jan 5, 2011
    Messages:
    99
    Likes Received:
    0
    Cool, thanks....

    I had forgotten there is a 1/2" oil feed as the back of the block thats the one I will use

    Cheers Pete
     
    #8
  9. SoDak

    SoDak Active Member

    Joined:
    Dec 29, 2006
    Messages:
    1,524
    Likes Received:
    3
    I was thinking that the instruction sheet with new blocks showed a preferred way to do this. I'll try to find that sheet tonight.
     
    #9
  10. Vhodoo Racing

    Vhodoo Racing New Member

    Joined:
    Jan 5, 2011
    Messages:
    99
    Likes Received:
    0
    That would be interesting. My block is a good few years old, combo was put together but never used. I got no paperwork with it

    Pete
     
    #10
  11. SoDak

    SoDak Active Member

    Joined:
    Dec 29, 2006
    Messages:
    1,524
    Likes Received:
    3
    #11
  12. Vhodoo Racing

    Vhodoo Racing New Member

    Joined:
    Jan 5, 2011
    Messages:
    99
    Likes Received:
    0
    Thanks for the info...

    Cheers Pete
     
    #12

Share This Page