On Board videos from Bakersfield

Discussion in 'Pit Buzz' started by Chris Demke, May 23, 2011.

  1. Chris Demke

    Chris Demke Super Comp

    Joined:
    Aug 6, 2003
    Messages:
    165
    Likes Received:
    0
    Here are links to a couple of onboard camera videos from last weekends race in Bakersfield...

    http://youtu.be/vjab5oIPh-g
    Round 2 of elims against Kenny Buzdas. GoPro Hero HD camera is mounted on the right front A-arm looking back and across into the other lane.

    http://youtu.be/Nd6TaNqJzmw
    Round 1 of elims, single/bye run. GoPro Hero HD camera is mounted on the back of the roll cage looking up at the DMPE MK 11 injector. Note that the blower belt starts to come apart at the starting line but enough belt stays on to run low ET and top speed of the event, 5.303 at 272 mph.

    enjoy!

    Chris
     
    #1
  2. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    great camera work..dave
     
    #2
  3. MaineAlkyFan

    MaineAlkyFan Active Member

    Joined:
    Oct 8, 2006
    Messages:
    364
    Likes Received:
    53
    That is soooo cool, I especially like clearly hearing the gear changes in the hat one, thanks for the alternative positioning!

    Chris Saulnier
    Gray, Maine
     
    #3
  4. jeff_7306

    jeff_7306 Member

    Joined:
    Aug 20, 2004
    Messages:
    126
    Likes Received:
    0
    Great camera shots Chris. I noticed something going by the injector right after you leave the line. Luckily didn't go in. I "clipped" a photo from the video, but don't have the authority to post it on here.:(
    If someone does I'll email to them.
     
    #4
  5. Chris Demke

    Chris Demke Super Comp

    Joined:
    Aug 6, 2003
    Messages:
    165
    Likes Received:
    0
    Thanks Jeff... That is the belt starting to come apart!

    Chris
     
    #5
  6. PROCOMP1

    PROCOMP1 New Member

    Joined:
    Apr 13, 2009
    Messages:
    271
    Likes Received:
    0
    Stupid question time Mr. Demke;

    A lot of that belt seemed to end up heading into that bad a$$ DMPE injector. How much of that 'shrapnel' ended up in the bottom of the oil pan, or did it cause any internal damage to the engine?

    Thanks
     
    #6
  7. Chris Demke

    Chris Demke Super Comp

    Joined:
    Aug 6, 2003
    Messages:
    165
    Likes Received:
    0
    To my knowledge no debris from the belt was found in the motor. There really is no way for the bits to make it into the oil pan unless there was a hole in a piston. If anything made it into the injector it was squished flat by the supercharger, sucked past an intake valve and spit out the exhaust header.
    I was impressed with the great job done by the belt guard, the two or three grade 8 bolts and hardware sticking out of the front of the blower on the left side of the picture. When what remained of the belt let go at the finish line you can see the guard bolts move as a result of the impact. The belt guard saved a very expensive carbon fiber hat from a good wack!

    Chris
     
    #7
  8. wkdivr

    wkdivr Member

    Joined:
    Jun 6, 2003
    Messages:
    40
    Likes Received:
    0
    As usual, Chris, excellent work! Pretty scary seeing the belt do that!! I'd love to see a video of what the valvetrain looks like during a run.............Or maybe I wouldn't!!
     
    #8
  9. wkdivr

    wkdivr Member

    Joined:
    Jun 6, 2003
    Messages:
    40
    Likes Received:
    0
    How's about a cockpit shot? I'd love to see an in-car shot from the old days with lever shifters, and stuff, too. Off the brake, shift, shift, steer, swat the chute levers, shut-off, brake. Even with shift buttons, there's still a LOT going on in there!!!
     
    #9
  10. Woodchip

    Woodchip Top Alcohol Dragster

    Joined:
    Aug 27, 2004
    Messages:
    429
    Likes Received:
    0
    Nice! Are the scoreboards just past the eighth mile? They seemed to flash past before the finish line. And why are the spindles makin all that racket just before the turn off?
     
    #10

Share This Page